Loading... Please wait...
  • PHONE ORDERS | Call us at 888.772.9479

BALLET BARRE KIT - Single Barre

  • Custom Barres BALLET BARRE KIT - Single Wall Mounted Ballet Barre Kit
  • Custom Barres BALLET BARRE KIT - Single Wall Mounted Ballet Barre Kit - Sissone Ouverte Bracket - Silver
  • SISSONE OUVERTE - Single Wall Mounted Ballet Barre Bracket - SILVER
  • SISSONE OUVERTE - Single Wall Mounted Fitness Bar Bracket - BLACK
  • SISSONE OUVERTE - Single Wall Mounted Fitness Bar Bracket - WHITE
  • SISSONE OUVERTE - Single Wall Mounted Fitness Bar Bracket - TIFFANY BLUE
  • SISSONE OUVERTE - Single Wall Mounted Fitness Bar Bracket - STAINLESS STEEL
  • SISSONE OUVERTE - Single Wall Mounted Ballet Bar Bracket - ANTIQUE BRASS
  • Custom Barres BALLET BARRE KIT - 5' Single Wall Mounted Ballet Barre Kit - Sissone Fermé Wall Mounted Barre Brackets - Silver
  • Image 10

BALLET BARRE KIT - Single Barre

Brand:
Weight:
34.00 LBS
Availability:
10-12 business days
$224.98
Qty:

Single Wall Mounted

Ballet Barre Kit / Fitness Barre Kit 

 

Kit includes:

• Wood Barre

• Mounting Brackets

• Hardware for wood stud installation

• Instructions

This beautiful wall mounted ballet barre kit may be used as a Ballet Barre or Fitness Barre.If the layout is suitable to only one or the other it would be indicated next to the barre's length.  If nothing is indicated the barre is suitable for both Barre Fitness and Ballet. 

Kits are currently available in two different styles of brackets:
Sissone Ouverte (open saddle) or Sissone Fermé (closed saddle).  

For Barre Fitness and Barre Method Classes we advise to space brackets 32"- 48" apart for extra support, strength and safety.

 

Please be advised that some of the suggested layouts will require backboard support. Contact us if you have any questions.

• Dance Barre diameters:

      • 1 5/8" Diameter (available in Unfinished Oak, Unfinished Maple and Unfinished Ash)

      • 2" Diameter  (available in Unfinished Oak and Unfinished Maple)

• Barres Projection from the wall: Sissone Ouverte and Sissone Fermé - 7"
(projection is measured from wall to center of the barre)

All Barres come with beveled ends, unless you instruct us otherwise

Beveled Ends - This option gives the barre a finished look. See below:

photo.jpg

Pre-Drilled Option - This option is available when ballet barres exceed 10' in length, when 2 or more barre sections need to be connected. This service is complimentary, free of charge. See below:

predrill.jpg

(Please note: pre-drilling is not for connecting brackets to the barre, as you may need to change bracket spacing upon installation.)

Need a different size? Our brackets and wood bars are also sold separately!

 swm-frm2-mpl-slv-fitness-0560-1600px.jpg

 

 

HOW MANY BRACKETS DO I NEED?
For BALLET we recommend spacing the brackets no further than 64" apart while for BARRE fitness classes spacing should be no further than 48". Custom Barres will gladly assist you in designing the layout for your barre. This is a complimentary service FREE of charge.

WHAT IS THE DIFFERENCE BETWEEN OPEN AND CLOSED SADDLE BRACKETS?
Both brackets are well secured into the wood barre by 2 wood screws under the saddle. Open saddle will give you the ability to stretch beyond the bracket location without having the bracket in the way, which is a really nice feature. The closed saddle provide you with slightly more support and hides the seam between 2 barre sections. Both options are perfectly suited for Barre fitness and/or Ballet.

HOW HIGH SHALL I MOUNT THE BARRE?
Standard Height for Ballet: 40" - 42" high (measured from floor to top of barre) Standard Height for Barre Fitness: 36" - 38" high (measured from floor to top of barre)

HOW LONG DOES IT TAKE TO SHIP?
All of our barres are custom made to order. Production time is approximately 5-7 business days if in stock. If not in stock it may take 7-12 business days. Once shipped it takes anywhere from 1-5 business days depending on your location. You can check exactly how long by checking out our shipping page. Please note that larger orders or custom sized brackets may take up to 4 weeks. We always try to get the orders out as soon as possible, so it may be even sooner than the estimated time.

WHAT IF I NEED THE BARRES SOONER?
Please contact us via email or phone. If your barres or brackets are in stock there is a good chance we could expedite your order and even offer a FedEx express services.

WHAT TYPE OF WOOD SHALL I CHOOSE?
Custom Barres carry only top quality hard wood, so it really depends on your budget and the look you are looking for. Unfinished Ash: $ (good) Unfinished Oak: $$ (better) Stains Better - Stronger than Ash Unfinished Maple $$$ (best) Stains Better - Stronger than Both to compare and see a close up picture of the wood please visit our available wood page.

DO I HAVE TO FINISH THE WOOD?
No. Many dancers wish to leave the barre unfinished. The wood barres come well sanded and unfinished. You may wish to stain the barre to match your room decor and/or apply 3 coats of Polyurethane to preserve the beauty of the wood, and bring out the beautiful wood grain.

HOW DO I CLEAN MY WOOD BARRE?
Wipe the barres with baby wipes / antibacterial wipes. These wipes are just as effective on sticky barres as they are on children. If the baby wipes have not removed all the sticky residue. Mix equal parts of water and vinegar in a spray bottle, shake gently. Spray the cleaning solution directly onto the barre and wipe with a cleaning rag. Repeat as necessary until all residue has been removed. Wipe the barres clean with a damp cloth to remove any remaining residue or vinegar solution.

DO YOU OFFER INSTALLATION SERVICES?
Unfortunately Custom Barres does not offer installation services, as we sell all over the USA and abroad; however, we will be more than happy to assist you with layout suggestions or any installation questions that you may have . We are also starting to build a prefferred installer database, so if you are an installer please feel free to share your information with Custom Barres so we can refer you to clients from your area. info@custombarres.com

DOES THE WOOD COME BEVELED?
Yes! If you did not say otherwise, all wood up to 10' in length will come beveled on both ends, so no sharp edges at the ends. It gives the ballet barre a finished look. Larger dance barres / fitness barres, for example a 14' barre, will come as 2 x 7' sections - one end will be pre-drilled for connection and the other end will be beveled, so when you connect the 2 barre sections together, it will look as if it was one long ballet barre. If you prefer the wood with no bevel or pre-drilling, please make sure to indicate this when you choose your wood barre.

Do you need one of our brackets in 1 1/2",1 3/4" or 2" diameter?
CAN YOU MAKE CUSTOM SIZE BRACKETS? or MAYBE EVEN A CUSTOM BRACKET?
Yes we can! We could make the brackets in different diameters and depending on the complexity we may be even able to produce a new custom designed bracket, but there is a minimum of 25 brackets per style per order and there will be a surcharge involved.

DO YOU OFFER FINANCING?
Yes, upon approval. Custom Barres offers financing through Paypal - 6 months no payments, no interest. This is subject to approval by Paypal.

Click the button below to add the BALLET BARRE KIT - Single Barre to your wish list.