CLASSIX SILVER (38" High) - CLEARANCE - SOLD AS IS - FINAL SALE
The CLASSIX adapts to any type of ballet barre studio with the option to install close to a mirror for fitness & rehab or further away for ballet & stretching.
Made for Commercial or Home Use.
Dimensions • 4" x 4" Base Plate
Plate thickness • 1/4" thick
Available Heights • 36" (Barre Fitness)
Projection from plate • approximately 2" (Projection is measured from one end of the plate to the center of the barre.)
Recommended spacing between brackets
36"- 48" for Fitness Bar
48" - 64" for Ballet Barre / Dance Barre
Barre bracket's material • Steel Powder Coated
Fits Barre's diameter • 1 5/8"
Tested for up to • 300 lbs
PRICE IS PER BRACKET
This bracket does not come with the bars. Please see our Bars for Floor Mounted Ballet Barre Page.
Please Note: Hardware is included for installing floor-mounted brackets into wood flooring. For maximum Strength, Stability and Safety it is HIGHLY recommended to install further into concrete with concrete anchors (available for purchase separately at https://www.custombarres.com/concrete-anchors/). Please understand that all construction conditions are slightly different so your installer may need to purchase different hardware (not included) from your local hardware store to accommodate your specific construction needs. Please consult with an experienced reputable licensed contractor.
Custom Barres floor-mounted brackets have been tested to support body-weight pressure during pushing/ pulling exercises in the typical high-powered barre fitness class. The brackets themselves are made of thick steel welded STRONG and will not bend with your bare hands!! (Only super heroes and herculean olympic level power-lifters may be excluded)
IMPORTANT INSTALLATION INFO: Are you experiencing a slight “flex” in your barre and mounts? Movement at your barre when body-weight is applied would be an Installation Concern and should be addressed with your installer. (Any tiny movement from loose or shallow installation at the base of the bracket will gradually increase toward the top of the bracket which would cause more significant movement at the barre.) All 4 Mounting Holes MUST be tightly attached to solid flooring and drilled in at a minimum of 2 3/4” deep (to accommodate bolts and anchors). Blocking should be installed if you are installing beneath a floating floor or into beams on a second floor. As Custom Barres is not on-site and is not licensed to provide specific construction advice, please consult with a licensed contractor for your specific floor conditions.