Brisé Single
(brize)
Single Floor Mounted Ballet Barre Bracket
The FRAPPE SINGLE gracefully reaches out with an extended projection to maximize stretching & minimize floor-space inference from the base of this floor mounted bracket. This sturdy, non-adjustable single floor-mounted bracket is ideal for installation in front of windows and mirrors. All necessary hardware is included for standard installation - Anchors not included
PRICE IS PER BRACKET
Highlights
- Many finishes to compliment any room
- Made from the highest quality steel.
- Choose from open or closed saddle style
- Choice of 1 5/8" or 2" diameter
- 3 height choices
- Choose Square or Circular Base Plate
- Commercial or Home Use
- Made 100% in the USA!
Product Details
Students can reach their full potential with the BRISÉ SINGLE ballet barre brackets without your studio losing floor space. With the additional projection you can mount the base of this floor mounted bracket against the wall, window or mirror (or further) and your dancers can stretch without wall interference. Barre Fitness studios enjoy the projection for prepping their class with props (balls and fitness bands) for each client. Lengthen and tone with a choice of 36”, 38” or 42” standard heights. Available in both open and closed saddle.
NEW! Enhanced Stability with Larger Base Plate Options
Now available: Upgrade to a larger 5" × 5" or 6" × 6" base plate for increased stability and performance.
Ideal for high-traffic studios, commercial fitness spaces, or installations requiring added support, the expanded base footprint ensures greater load distribution and anchoring strength — without compromising on style.
✔️ More stability
✔️ Cleaner load transfer
✔️ Engineered for demanding use environments
This bracket does not come with the bars. Please see our Bars for Floor Mounted Ballet Barre Page.
To compare all our available floor brackets, please visit our Compare Floor Brackets Page
Please Note: Hardware is included for installing floor-mounted brackets into wood flooring. For maximum Strength, Stability and Safety it is HIGHLY recommended to install further into concrete with concrete anchors (available for purchase separately at https://www.custombarres.com/concrete-anchors/). Please understand that all construction conditions are slightly different so your installer may need to purchase different hardware (not included) from your local hardware store to accommodate your specific construction needs. Please consult with an experienced reputable licensed contractor.
Custom Barres floor-mounted brackets have been tested to support body-weight pressure during pushing/ pulling exercises in the typical high-powered barre fitness class. The brackets themselves are made of thick steel welded STRONG and will not bend with your bare hands!! (Only super heroes and herculean olympic level power-lifters may be excluded)
IMPORTANT INSTALLATION INFO: Are you experiencing “flex” in your barre and mounts? A slight flex of up to 3/8” deflection is an acceptable tolerance. More significant movement at your barre when body-weight is applied would be an Installation Concern and should be addressed with your installer. (Any tiny movement from loose or shallow installation at the base of the bracket will gradually increase toward the top of the bracket which would cause more significant movement at the barre.) All 4 Mounting Holes MUST be tightly attached to solid flooring and drilled in at a minimum of 3” deep (to accommodate bolts and anchors). Blocking should be installed if you are installing beneath a floating floor or into beams on a second floor. As Custom Barres is not on-site and is not licensed to provide specific construction advice, please consult with a licensed contractor for your specific floor conditions.
Product Specs
Diameter1 5/8" or 2"
Tested300 lbs
MaterialSteel Powder Coated
ProjectionApproximately 5"
Measured from wall to center of barre
Measured from wall to center of barre
HeightAvailable in 3 heights
Ballet42"
Diameter1 5/8" or 2"
Tested300 lbs
MaterialSteel Powder Coated
ProjectionApproximately 5"
Measured from wall to center of barre
Measured from wall to center of barre
HeightAvailable in 3 heights
Ballet42"
Diameter1 5/8" or 2"
Tested300 lbs
MaterialSteel Powder Coated
ProjectionApproximately 5"
Measured from wall to center of barre
Measured from wall to center of barre
HeightAvailable in 3 heights
Ballet42"
Custom Barres wants to show off your space!
Share a snapshot or professional photo of your studio with Custom Barres and be featured on our website
and/or on social media
Custom Barres can be found around the World in homes, gyms, hotels, studios and much more…
Browse a gallery of our our customers photos for design ideas or to find out where to take a new class in your home town or while you are traveling across the globe.We love hearing your stories and seeing your designs in living color! Contact us at support@custombarres.com to find out how!